Paratherm CE Heat Transfer Fluid

Paratherm CE HTF huwa ekonomiku fluwidu għat-trasferiment tas-sħana li ġie fformulat minn stokks bażi raffinati ħafna. Huwa likwidu qawwi u ċar ibbażat fuq kimika paraffinika idrotrattata u huwa rreġistrat NSF HT-1, li jissodisfa l-kriterji kollha deskritti f'21 CFR 178.3570 għal kuntatt inċidentali mal-ikel. Jeċċedi wkoll il-miri stretti ta 'prestazzjoni ta' L-QB300 taħt l-Istandard Nazzjonali Ċiniż GB23971/GB23800.

Paratherm CE fluwidu għat-trasferiment tas-sħana is engineered to provide robust performance up to 600°F / 316°C in closed-loop liquid phase systems. Its economical performance makes Paratherm CE ideal for use in industrial drying processes, extraction sciences, plastics, polymers & textiles, and food & beverage processing.

Oil Store stocks Paratherm CE HTF in 200L barrels here in the UK ready for next day delivery nationwide.

Applikazzjoni Industriji

Xjenzi ta' Estrazzjoni
Ipproċessar ta' Ikel u Xorb
Proċessi Industrijali tat-Tnixxif
Plastik, Polimeri u Tessuti

Operating Range for Paratherm CE

Riżorsi u Dokumenti

Estensjoni tal-Ħajja tal-Fluwidu
When Paratherm fluids are used as recommended they can provide many years of reliable service. Systems using Paratherm fluids should be designed and installed by qualified engineers and should be maintained as any other critical production asset. Fluid oxidation is the leading cause of the most serious maintenance issues associated with closed-loop heat transfer systems– including cold spots, heater coking, plugged pressure sensors and ultimately fluid gelling. Paratherm recommends installation of a nitrogen blanket on the expansion tank to prevent oxidation of the fluid. All systems may benefit from side-stream filtration to promote long-term fluid and system reliability.

Servizzi ta' Analiżi ta' Fluwidu
Paratherm offers a comprehensive fluid monitoring service to help keep systems running at their best. Their state-of-the-art laboratory is certified to ISO 9001:2015 and well-equipped to run all critical tests. Annual testing is recommended and can identify system issues before they become catastrophic. The fluid in new systems should be tested within 9 to 12 months of start-up. New fluid in existing systems should be tested within the first month of operation to establish a base line for future testing, and annually thereafter.

Sostituzzjoni tal-fluwidu
Replacement should be preceded by analysis of the fluid to determine if cleaning or flushing of the system is recommended prior to introducing new fluwidu għat-trasferiment tas-sħana. Newly commissioned systems typically do not require cleaning before filling. Paratherm recommends installation of a Y-strainer with a minimum 60-mesh screen up-stream of the pump to catch any residues from manufacturing and construction of system components.

Ħażna ta 'fluwidu
Barrels and pails should be stored indoors to prevent environmental contamination. If sealed barrels must be left outdoors, provisions should be made to prevent water from pooling on their tops. While unopened pails are considered weatherproof, Paratherm recommends they not be stacked when stored outdoors. If the fluid is below its minimum pumpable temperature, the containers may be moved indoors to warm up before charging into the system. Refer to the product safety data sheet (SDS) for additional handling and storage recommendations.

Browse the Paratherm range